Linux version 2.6.5 (root@spruce) (gcc version 3.3.3 (Debian 20040401)) #1 Wed Apr 28 01:02:40 EDT 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fffc000 (usable) BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data) BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131068 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126972 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 ASUS ) @ 0x000f5e80 ACPI: RSDT (v001 ASUS A7S333 0x42302e31 MSFT 0x31313031) @ 0x1fffc000 ACPI: FADT (v001 ASUS A7S333 0x42302e31 MSFT 0x31313031) @ 0x1fffc0b2 ACPI: BOOT (v001 ASUS A7S333 0x42302e31 MSFT 0x31313031) @ 0x1fffc030 ACPI: MADT (v001 ASUS A7S333 0x42302e31 MSFT 0x31313031) @ 0x1fffc058 ACPI: DSDT (v001 ASUS A7S333 0x00001000 MSFT 0x0100000b) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:6 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Built 1 zonelists Kernel command line: root=/dev/hda5 ro video=vesa:ywrap:mtrr vga=31B Found and enabled local APIC! Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 1333.314 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Memory: 515796k/524272k available (1551k kernel code, 7728k reserved, 668k data, 140k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 2637.82 BogoMIPS Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(TM) XP 1500+ stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1333.0177 MHz. ..... host bus clock speed is 266.0635 MHz. NET: Registered protocol family 16 spurious 8259A interrupt: IRQ7. PCI: PCI BIOS revision 2.10 entry at 0xf19a0, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: IRQ9 SCI: Level Trigger. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Enabling SiS 96x SMBus. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Simple Boot Flag at 0x3a set to 0x80 Machine check exception polling timer started. VFS: Disk quotas dquot_6.5.1 Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU0] (supports C1) Real Time Clock Driver v1.12 Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) 8139too Fast Ethernet driver 0.9.27 eth0: RealTek RTL8139 at 0xe0809000, 00:e0:29:47:11:fb, IRQ 5 eth0: Identified 8139 chip type 'RTL-8139A' Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 0000:00:02.5 SIS5513: chipset revision 208 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS745 ATA 100 (2nd gen) controller ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA hda: WDC WD300BB-00CCB0, ATA DISK drive hdb: WDC AC31600H, ATA DISK drive hdb: Disabling (U)DMA for WDC AC31600H (blacklisted) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: LG CD-RW CED-8120B, ATAPI CD/DVD-ROM drive hdd: HITACHI DVD-ROM GD-2500, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 58633344 sectors (30020 MB) w/2048KiB Cache, CHS=58168/16/63, UDMA(100) hda: hda1 hda2 hda3 hda4 < hda5 hda6 > hdb: max request size: 128KiB hdb: 3173184 sectors (1624 MB) w/128KiB Cache, CHS=3148/16/63 hdb: hdb1 hdc: ATAPI 32X CD-ROM CD-R/RW drive, 8192kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 24X DVD-ROM drive, 512kB Cache, DMA ide-floppy driver 0.99.newide mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 140k freed Adding 506008k swap on /dev/hda6. Priority:-1 extents:1 EXT3 FS on hda5, internal journal drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 ohci_hcd 0000:00:02.2: Silicon Integrated Systems [SiS] USB 1.0 Controller ohci_hcd 0000:00:02.2: irq 9, pci mem e084a000 ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ohci_hcd 0000:00:02.3: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2) ohci_hcd 0000:00:02.3: irq 9, pci mem e084c000 ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. usb 1-1: new low speed USB device using address 2 input: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse OpticalŪ] on usb-0000:00:02.2-1 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A nvidia: module license 'NVIDIA' taints kernel. 0: nvidia: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-5336 Wed Jan 14 18:29:26 PST 2004 Linux agpgart interface v0.100 (c) Dave Jones 0: NVRM: AGPGART: unable to retrieve symbol table atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.